ROC-1000X water-based stencil cleaning machine

Category：Industrial Cleaning
The number of clicks：
Release date：2020-05-06
在线询价

Detailed introduction

Water-based stencil cleaning machine introduction

Water-based stencil cleaning machine ROC-1000 Application areas:

The ROC-1000 stencil cleaning machine is a third-generation stencil cleaning machine designed for the “Water-Based” process: fully automatic cleaning, rinsing and drying process. (Using a unique double four-bar cleaning , rinsing design, double four air knife wind cut dry design, rinsing using online filtering to ensure cleanliness)

Applicable to: SMT steel mesh, copper mesh, plastic mesh, printing jig, PCB misprinting plate and PCBA cleaning, can effectively clean the surface of the printing and the residual solder paste, red glue and other contaminants;

Water-based stencil cleaning machine ROC-1000 cleaning principle diagram:

It adopts unique double four-bar cleaning and rinsing design (1 figure identifies 10 nozzles per spray bar), double four wind knife air-cut drying design (2 figure identification), greatly improving cleaning efficiency, and rinsing adopts online filtering method To ensure cleanliness)

Water-based stencil cleaning machine ROC-1000 Features:

1, rapid & super clean effect: SMT steel mesh, copper mesh, plastic mesh, SOP printing steel mesh, screen printing glue fixture, PCB misprinting board and PCBA board, can quickly and effectively clean the surface after printing to residual tin Contaminants such as cream and red glue;

2. Standard water-based automatic cleaning mode: Complete cleaning, rinsing and drying in a cleaning chamber, small in size and compact in structure;

3, the whole process visualization: The cleaning room is equipped with a visualization window, the cleaning process is clear at a glance;

4, a wide range of applications: SMT / SOP steel mesh, wire mesh, printing fixture, SMT scraper, large size PCBA / misprinted board;

5, DI water real-time resistivity cleanliness monitoring system: used to monitor the cleaning effect, the resistivity can be set, the resistivity control range is 0~18MΩ;

6. Adjustable nozzle pressure and symmetrical design: Solve the tension problem of SMT/SOP steel mesh under high pressure spray conditions during cleaning process;

7. Standard cleaning tank heating system: The requirement of water-based emulsification for water-based process greatly improves cleaning efficiency and shortens cleaning time;

8. Low operating cost: The built-in filter device can realize the recycling of the solvent, prolong the saturation time of the pollutant load, and use the compressed air recovery pipeline and the residual chemical liquid in the pump at the end of the cleaning, which can effectively save 50% of the cleaning agent;

9, can clean large size PCBA (800mm * 800mm)

10, high pressure fan + four wind knife wind cut dry: 7.5HP high pressure fan, higher efficiency (3 ~ 5 minutes), more thorough!

11. All Chinese large touch screen operation interface: Adopt stable and reliable imported brand color touch screen for: solvent temperature, cleaning time, rinsing times/time, rinsing temperature, drying time, drying temperature, conductivity monitoring parameters, etc... set up;

Water-based stencil cleaning machine ROC-1000 Parameters:

Applicable steel mesh size	780(L) × 780(W) × 40mm(H) [Oversized size needs to be ordered]
Maximum tank volume	60 升*2PCS (Man)
Spray pump	4HP stainless steel multistage centrifugal pump
Cleaning method	The stencil moves back and forth, and the four spray bars are sprayed with high pressure liquid (cleaning→wind cutting→rinsing→wind cutting→drying)
Cleaning time	1 to 3 minutes (solder paste)
Rinsing time	1 ～2minutes
Wind cut time	1 ～2minutes
Drying time	1 ～2minutes
Resistivity tester range	0--18MΩ
External power supply, air source	AC380V 50HZ 33KW 60A/ 0.45 ～ 0.7 (Mpa)
Air consumption	（200 ～ 300） L/Minutes
Exhaust port size	Φ123×30mm(H) Maximum gravitational wind speed 3m/see
filtering system	Primary filter tank filtration: 10μm (filter impurities and labels)
filtering system	Three-stage filter: 0.45μm (filter ball and rosin particles)
Machine net weight	~550Kg
Machine size	1510mm(L) ×1160mm(W) × 1860mm(H)